In this page we will see how the tail goes into the body, as well as elevator attachment.
First we will attach the elevator.
Slide the elevator under the rudder.
Insert and tighten the screw for the elevator.
Take the Servo leads coming from the tail and connect them to the servo leads coming from the body of the E386.
Place the lead locks over top of the Servo connections.
Now push the carbon rod all the way into the body, the notches on the rod will catch on the orange tube at the furthest point.
Tighten the three screws on the body to keep the tail tightly in place.
After the tail has been firmly attached to the fuselage it’s time to move onto Wing Assembly.