E384 – Tail Assembly

In this page we will see how the tail goes into the body, as well as elevator attachment.

First we will attach the elevator.

Slide the elevator under the rudder.

Ele1 Ele2

Pull the sleeve back and install the connector.
Ele3ELE4

Insert and tighten the screw for the elevator.

Ele5

Take the Servo leads coming from the tail and connect them to the servo leads coming from the body of the E384.

SAMSUNG CSC

Place the lead locks over top of the Servo connections.

SAMSUNG CSC

Now push the carbon rod all the way into the body, the notches on the rod will catch on the orange tube at the furthest point.

SAMSUNG CSC

Tighten the three screws on the body to keep the tail tightly in place.

SAMSUNG CSC

After the tail has been firmly attached to the fuselage it’s time to move onto Wing Assembly.