In this page we will see how the tail goes into the body, as well as elevator attachment.
First we will attach the elevator.
Fit the elevator onto the orange track on the tail.
Attach the servo arm protruding out of the tail to the pom horn on the elevator.
Lastly screw the tail into place.
Take the Servo leads coming from the tail and connect them to the servo leads coming from the body of the E384.
Place the lead locks over top of the Servo connections.
Now push the carbon rod all the way into the body, the notches on the rod will catch on the orange tube at the furthest point.
Tighten the three screws on the body to keep the tail tightly in place.
After the tail has been firmly attached to the fuselage it’s time to move onto Wing Assembly.